2,7 MB - Multilingual
SessionViewer is a standalone application for recording, viewing and editing exported SimView debriefing files, SimPad log files and BLS result files.
If you add a license to SessionViewer, you can also record the activities during a Standardized Patient Recording or Laerdal manikin scenarios controlled by Instructor Applications. When a USB-camera and a microphone and/or a Patient Monitor is added to the PC, can you record both video and audio to support the debriefing of the scenario with the students after the training session.
If the PC is a LLEAP Instructor or Patient vitals PC and is connected to the internet, SessionViewer can be updated, along with LLEAP and other software, through the LLEAP Simulation Home screen update tile.
To manually install or update:
1. Download the installer and move to the PC with SessionViewer installed.
2. If SessionViewer is running, please shut it down .
3. Locate and double-click the installer to open the installer.
4. Follow the prompts, as the installer will take you through the necessary steps.
5. When the installer completes, you may be prompted to restart the system – please do so.
6. SessionViewer will be ready to use once the installer has completed.
Licensing and Equipment from your existing configuration will carry over to the new version upon upgrade.
1 116,7 MB
The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.
Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.
1 636,8 MB
LLEAP 6.3 requires SimView Server Version 6.1.6339 or later. We recommend you download and install the latest version from hereNote that all computers in your simulator environment should use the same version of the LLEAP SW.
Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated.
See help file for details.
The new Laerdal Simulation Home improves the ability to use SimLink or Ad-Hoc networks. This is temporarily until a replacement for Ad-Hoc is ready.
Remember: This is only Laerdal Simulation Home page, if you don't have LLEAP already installed you also need Laerdal Learning Application v. 6.2.0.
1 584,9 MB
IMPORTANT:Before installing LLEAP 6.2, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: https://www.microsoft.com/en-us/download/details.aspx?id=53840 Select and run vc_redist.x86 then try running LLEAP.
LLEAP software unifies the control of all PC operated Laerdal simulators and brings simplicity to running simulation training.
Click the software link above to trial the software and learn about how you can start using LLEAP with your existing PC operated simulator.
The LLEAP software download includes the Laerdal Patient Monitor and SimDesigner software.