The Laerdal Suction Unit (LSU) sets the standard
The Laerdal Suction Unit is used all over the world by countless providers as it is:
- Powerful and effective
- Prepared for emergency situations
- Effective at improving patient safety
Reusable or Semi Disposable configuration?
The LSU comes in 2 different configurations, so that you can choose the product that best suits your needs.
Video DemonstrationHow to use and run a device test on the LSU as well as assembly, disassembly and cleaning guidance.
With a reusable canister and disposable liner to avoid contact with contaminates.
Laerdal recommends the Serres configuration which has an improved canister holder for easy canister release and to make it easier to visualise the fluid volume in the canister.
Powerful and Effective
The suction unit’s quiet running and shock & splash proof design makes it an excellent option in nearly all settings. In extreme situations, the LSU can reach a vacuum of 500 + mmHg and has a flow rate of >25 LPM, exceeding International Standards.
Prepared for emergency situations
For the assurance you need, the LSU device test will tell you in 10 seconds whether the LSU is ready for use in the field. The test includes four important requirements for the LSU to pass.
- Blockage in the Suction System
- Vacuum build-up efficiency
- Maximum achievable vacuum level
- Air leakages in the Pump System
As the Laerdal Suction Unit automatically charges when connected to an external power source, and charges to 80% after just 3 hours, it is ready for use when needed.
Effective at improving patient safety
For ease of use in difficult situations, the LSU has a built in suction indicator, with colour coding, to help ensure the correct vacuum strength is selected for children.
This feature, combined with the extra-large dial for ease of use with large gloves, the LSU enables providers to quickly select the correct amount of suction for any given situation.
The display also monitors:
- Power ON Indicator
- External Power Indicator
- Battery level Indicator
- Vacuum Indicator
- Failure Mode Indicator: LED is lid if a malfunction has been detected
Converting to our Serres Configuration
Due to the ongoing recall of Hospira liners and canisters, we ask our disposable liner customers to switch to the preferred Serres configuration. Please contact your local Laerdal representative or field office for more detailed information. In our aim to Helping Save Lives, we are trying to make the transition as easy as possible. Kits to convert your unit are being provided free of charge. Please see the video below for easy instruction on how to convert your unit to the Serres configuration.