HomepageProdukt DownloadsDownloads for LLEAP - Laerdal Learning Application

Downloads for LLEAP - Laerdal Learning Application



DFU

Session Viewer - User Guide

2,7 MB - Multilingual
10/07/2015

Software

Laerdal Simulation Home (LLEAP) v. 6.2.1.3021

50,2 MB
27/04/2017

The new Laerdal Simulation Home improves the ability to use SimLink or Ad-Hoc networks. This is temporarily until a replacement for Ad-Hoc is ready.

    The application detects that user wants to connect to a SimLink network, checks if the existing driver supports this. If the existing driver does not support Ad-Hoc then the application will ask the user for the permission to downgrade the driver to support this.

    Known Issue: Some systems will get Windows Bluescreen. If this happens, we instead recommend to either:
    1. Connect to Your company's Wireless network, preferably configured as a VLAN.
    2. Set up a dedicated Wireless simulation networ using a wrirelss Access point / router.

Remember: This is only Laerdal Simulation Home page, if you don't have LLEAP already installed you also need Laerdal Learning Application v. 6.2.0.

Laerdal Learning Application (LLEAP) v. 6.2.0.2856

1 584,9 MB
26/04/2017

IMPORTANT:

Before installing LLEAP 6.2, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: https://www.microsoft.com/en-us/download/details.aspx?id=53840 Select and run vc_redist.x86 then try running LLEAP.
    LLEAP 6.2 requires SimView Server Version 6.0.6116 or later We recommend you download and install the latest version from here: http://www.laerdal.com/SimView#
    Note that all computers in your simulator environment should use the same version of the LLEAP SW.

    Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated.

    See help file for details.

MAIN CHANGES:
  • Added ventilation animations similar to what we had in the legacy applications.
    • Assisted ventilations are now shown on the simulator avatar together with any spontanous ventilations.
  • Added ability to show "EFM only" on a separate instance of Patient Monitor.

Remember: There is an update to Laerdal Simulation Home in addition
SessionViewer Software – Version 6.0.6130

137,3 MB - English
09/12/2016

SessionViewer is a standalone application for recording, viewing and editing exported SimView debriefing files, SimPad log files and BLS result files.

If you add a license to SessionViewer, you can also record the activities during a Standardized Patient Recording or Laerdal manikin scenarios controlled by Instructor Applications. When a USB-camera and a microphone and/or a Patient Monitor is added to the PC, can you record both video and audio to support the debriefing of the scenario with the students after the training session.

Release Notes: Added the ability to hide the debriefing log during playback of a ssx file Minor user interface upgrades Fixed a bug that displayed an error if an unknown attribute was transferred from a Instructor Client. Fixed a bug that would allow the installer to install two instances of the software on the same machine.

Update instructions:  If the PC is a LLEAP Instructor or Patient vitals PC and is connected to the internet, SessionViewer can be updated, along with LLEAP and other software, through the LLEAP Simulation Home screen update tile.

To manually install or update:

1. Download the installer and move to the PC with SessionViewer installed.

2. Locate and double-click the installer to open the installer.

3. Follow the prompts, as the installer will take you through the necessary steps.

4. When the installer completes, you may be prompted to restart the system – please do so.

5. SessionViewer will be ready to use once the installer has completed.

Licensing and Equipment from your existing configuration will carry over to the new version upon upgrade.

LLEAP Patch 5.4

105,1 MB - English
13/05/2016

Release notes:

This LLEAP patch resolves issues with communication between LLEAP 5.4 and SimView Server 5.2.5799.  Please install this patch on all of your LLEAP instructor PC’s regardless of whether you utilize SimView server for your AV Capture and debriefing.

LLEAP 5.4 Win10 Patch

1,7 MB - Multilingual
20/04/2016

This patch is fixing an issue in LLEAP and Patient Monitor 5.4 when upgrading a PC running Windows 7 or Windows 8 to Windows 10, where the license may not be accepted. If this happens you are presented with this error message: "No valid hardware ID found." when starting LLEAP or Patient Monitor. Run this patch to prevent or fix the problem.


Datenschutzhinweis und Impressum. Copyright 2001-2017, Laerdal Medical. Alle Rechte vorbehalten.