HomeProduct and Software DownloadsDownloads for SimJunior

Downloads for SimJunior

Directions for Use

Quick Setup Guide SimJunior LLEAP English

1,8 MB - English

SimJunior Directions for Use (DFU)

48,8 MB - English

SimJunior Quick Setup Guide (SimPad)

9,6 MB - English

SimJunior Quick Setup Guide (VitalSim)

2,7 MB - English


SimJunior Flyer

1,5 MB - English


Laerdal Learning Application (LLEAP) software download

- Multilingual

LLEAP software unifies the control of all PC operated Laerdal simulators and brings simplicity to running simulation training.

Click the software link above to trial the software and learn about how you can start using LLEAP with your existing PC operated simulator.

The LLEAP software download includes the Laerdal Patient Monitor and SimDesigner software.

LLEAP 5.4 Win10 Patch

1,7 MB - Multilingual

This patch is fixing an issue in LLEAP and Patient Monitor 5.4 when upgrading a PC running Windows 7 or Windows 8 to Windows 10, where the license may not be accepted. If this happens you are presented with this error message: "No valid hardware ID found." when starting LLEAP or Patient Monitor. Run this patch to prevent or fix the problem.

USB 3.0 patch for ELO Monitor

74,5 MB

With this patch it is possible to communicate between the ELO monitor and laptops via a USB 3.0 port. The patch also supports newer versions of the ELO monitor and is compatible with Windows 7 software. The patch addresses the following patient simulator versions (only): SimMom 1.0.0 SimBaby 1.6 SimMan 3.5 SimNewB 1.4 SimNewB for VS2 ALS Sim Adv 1.1 ALS Sim Adv for VS2 SimJunior 1.0.2 SimJunior for VS2 SimMan3G 2.3.4 Notice that you have to re-apply the patch if you install additional patient simulators on your computer. Future versions of the simulators will contain the new ELO driver and do not need the patch. However, if you combine a future version with any of the versions listed above, the patch is mandatory. PLEASE NOTE: You must also use the latest version of the Laerdal Debrief Viewer
Delete Registry (USB Smart Set Commands)

0,1 MB - English

This is a fix for touchscreen where function stops working for SimJunior instructor app.
SimJunior Advanced Software for SimPad (Legacy Instructor Application)

274,4 MB - English

  • For PC operation with the SimPad Link Box (will not work with VitalSim control unit) 
  • SimPad Link Box must be operating SimPad Software v 1.0.7 up to v 1.7.5 NOTE: Do not use SimPad SW 5.0.x or higher as this SW is not suitable for the Legacy Instructor Application. Download the latest software from the software section on the SimPad page.
  • This ADVANCED software will only work with ELO touchscreen monitors and is not for use with SimPad Portable Patient Monitor or SimPad 17" Patient Monitors.
SimJunior Debrief Viewer Install

107,7 MB - English

For use with legacy SimJunior Application Software

SimJunior Scenario Editor Update

4,9 MB

Software update to fix issue with the scenario editor where unlocked scenarios cannot be viewed with the editor. Down the "ScenarioEditorUpdate" to the PC with the Instructor Application and run the application.

© 2001-2016 Laerdal Medical. All Rights Reserved.