HomeDownloadsDownloads for LLEAP - Laerdal Learning Application

Downloads for LLEAP - Laerdal Learning Application



Directions for Use

Session Viewer - User Guide

2,7 MB - Multilingual
10.07.2015

Software

Laerdal Learning Application (LLEAP) - patch 6.3.2

131,6 MB
24.11.2017

This patch resolves the below issues:

  • When performing synchronization to SimStore some are experiencing problems with content not releasing from LLEAP.
  • The message "Please wait for background task to finish" is resolved.
  • Physiological patient cases that leads to cardiac arrest fails to stop breathing.
  • Patient Monitor 6.3.0 has been failing to reconnect if the connection to Link Box has been lost.

The patch also include changes to SimMan 3G family simulators, remember to update Simulator.

SimView Downloads


24.11.2017

Laerdal Patient Monitor 6.3.0

1 116,7 MB
03.11.2017

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

Main changes:

  • Now able to play more media formats
  • General maintenance, bugfixes and improvements
Laerdal Patient Monitor patch 6.3.0 Build 3141

2,7 MB
18.10.2017

This patch fixes an issue where a Patient Monitor running on an ELO touch screen doesn't register touch input when selecting radiology/media/labs files to present on the monitor. The patch is only required if you use an ELO touch screen connected as a Patient Monitor screen.

IMPORTANT: This patch requires that LLEAP 6.3.0 is installed. If you only have Patient Monitor installed and need this patch, please either install LLEAP first and then the patch, or contact customer support to resolve the issue.

Laerdal Simulation Home patch ver.6.3.1

67,1 MB
08.08.2017

This patch fixes an issue on some PCs where users of SimLink ad-hoc connections have problems connecting.

IMPORTANT: Using SimLink is not recommended and this fix will not solve all connection issues with SimLink. Instead of using SimLink, Laerdal recommends that you whenever possible connect your devices in one of these ways, in prioritized order:

1. Connect to your company's wireless network, preferably configured as a VLAN.

2. Set up and connect to a dedicated wireless simulation network using a wireless access point/router.

3. Use Laerdal Network Selector to create a Hosted network.

Laerdal Learning Application (LLEAP) v. 6.3.0

1 636,8 MB
23.06.2017

IMPORTANT:

    Before installing LLEAP 6.3, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: Link.
    Select and run vc_redist.x86 then try running LLEAP.

If using SimView with LLEAP 6.3 then SimView Server Version 6.1.6339 or later is required. We recommend you download and install the latest version from here

Note that all computers in your simulator environment should use the same version of the LLEAP SW.

Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated.

See help file for details.

MAIN CHANGES:

  • Improved support for Hosted network in Windows 10. This means the LLEAP PC can act as a wireless access point, running a network for a single simulator. One simulator, one Patient Monitor and one Instructor Application or SimPad can be connected to this network.
  • Improved support for having multiple LLEAP Instructor applications connected to the same simulation session, for supporting multiple instructor roles.
  • Added ability to show custom input dialogs when running a scenario utilizing this ability.
  • Added possibility to have multiple SimMom deliveries in the same session.
  • Added custom deceleration type for SimMom EFM. Now possible to control the appearance of decelerations in detail.
  • Added auscultation focus for SimMom. Requires that Link Box is updated to the version that comes with LLEAP 6.3.
  • Added ability to set custom drug names for RFID tags also available when running scenarios. See drug tab in profile editor.
  • LLEAP avatar will now indicate if the airflow is blocked (e.g. when tongue fallback is activated).
  • LLEAP now showing a more smooth animation of the compression rate "speedometer".
  • Added ability to collect LLEAP log files by right clicking on the Help tile in Laerdal Simulation Home.
Laerdal Simulation Home (LLEAP) v. 6.2.1.3021

50,2 MB
27.04.2017

The new Laerdal Simulation Home improves the ability to use SimLink or Ad-Hoc networks. This is temporarily until a replacement for Ad-Hoc is ready.

    The application detects that user wants to connect to a SimLink network, checks if the existing driver supports this. If the existing driver does not support Ad-Hoc then the application will ask the user for the permission to downgrade the driver to support this.

    Known Issue: Some systems will get Windows Bluescreen. If this happens, we instead recommend to either:
    1. Connect to Your company's Wireless network, preferably configured as a VLAN.
    2. Set up a dedicated Wireless simulation networ using a wrirelss Access point / router.

Remember: This is only Laerdal Simulation Home page, if you don't have LLEAP already installed you also need Laerdal Learning Application v. 6.2.0.

Laerdal Learning Application (LLEAP) v. 6.2.0.2856

1 584,9 MB
26.04.2017

IMPORTANT:

Before installing LLEAP 6.2, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: https://www.microsoft.com/en-us/download/details.aspx?id=53840 Select and run vc_redist.x86 then try running LLEAP.
    LLEAP 6.2 requires SimView Server Version 6.0.6116 or later We recommend you download and install the latest version from here: http://www.laerdal.com/SimView#
    Note that all computers in your simulator environment should use the same version of the LLEAP SW.

    Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated.

    See help file for details.

MAIN CHANGES:
  • Added ventilation animations similar to what we had in the legacy applications.
    • Assisted ventilations are now shown on the simulator avatar together with any spontanous ventilations.
  • Added ability to show "EFM only" on a separate instance of Patient Monitor.

Remember: There is an update to Laerdal Simulation Home in addition

© 2001-2017 Laerdal Medical. All Rights Reserved.