LLEAP 5.4 Win10 Patch
1,7 MB - 多言語
This patch is fixing an issue in LLEAP and Patient Monitor 5.4 when upgrading a PC running Windows 7 or Windows 8 to Windows 10, where the license may not be accepted. If this happens you are presented with this error message: "No valid hardware ID found." when starting LLEAP or Patient Monitor. Run this patch to prevent or fix the problem.
USB 3.0 patch for ELO Monitor
With this patch it is possible to communicate between the ELO monitor and laptops via a USB 3.0 port. The patch also supports newer versions of the ELO monitor and is compatible with Windows 7 software. The patch addresses the following patient simulator versions (only): SimMom 1.0.0 SimBaby 1.6 SimMan 3.5 SimNewB 1.4 SimNewB for VS2 220.127.116.11 ALS Sim Adv 1.1 ALS Sim Adv for VS2 18.104.22.168 SimJunior 1.0.2 SimJunior for VS2 22.214.171.124 SimMan3G 2.3.4 Notice that you have to re-apply the patch if you install additional patient simulators on your computer. Future versions of the simulators will contain the new ELO driver and do not need the patch. However, if you combine a future version with any of the versions listed above, the patch is mandatory. PLEASE NOTE:
You must also use the latest version of the Laerdal Debrief Viewer
SimJunior Scenario Editor Update
Software update to fix issue with the scenario editor where unlocked scenarios cannot be viewed with the editor. Down the "ScenarioEditorUpdate" to the PC with the Instructor Application and run the application.
SimJunior VitalSim Software
49,0 MB - 英語
Software update for existing VitalSim units to add SimJunior functionality.
The following programs will be installed/updated: Program update, Scenario Builder, Log and Scenario control.
Once downloaded, navigate to , . Select , . For additional directions, please reference the SimJunior Software Program Update instructions in the Maintenance section of the Directions for Use.
SimJunior Advanced Software
237,1 MB - 英語
SimJunio Instructor Application Software was discontinued September 2014 and replaced by Laerdal Learning Application (LLEAP) Software. Laerdal will ensure availability and support of Instructor Application (latest software version 1.0.2) for a minimum of five years from the date of discontinuation. No additional improvements or modifications will be made to the Instructor Application. In order to access the latest software advancements available for your simulator, please learn more about LLEAP.