HomepageDownloadsDownloads for SimNewB

Downloads for SimNewB



DFU

User Guide, SimNewB (EN)

9.1 MB - English
24/11/2022

User Guide, SimNewB (DE)

10.4 MB - German
24/11/2022

IPI for SimNewB Tetherless

5.1 MB - Multilingual
12/08/2022

Rev F

Software

LLEAP download page


01/12/2021

Kostenlose Simulationsszenarien


17/01/2019

Holen Sie das Optimum aus Ihrem Simulator heraus
USB 3.0 patch for ELO Monitor

74.5 MB
31/10/2014

With this patch it is possible to communicate between the ELO monitor and laptops via a USB 3.0 port. The patch also supports newer versions of the ELO monitor and is compatible with Windows 7 software. The patch addresses the following patient simulator versions (only): SimMom 1.0.0 SimBaby 1.6 SimMan 3.5 SimNewB 1.4 SimNewB for VS2 2.0.1.77 ALS Sim Adv 1.1 ALS Sim Adv for VS2 2.0.0.122 SimJunior 1.0.2 SimJunior for VS2 2.0.0.56 SimMan3G 2.3.4 Notice that you have to re-apply the patch if you install additional patient simulators on your computer. Future versions of the simulators will contain the new ELO driver and do not need the patch. However, if you combine a future version with any of the versions listed above, the patch is mandatory. PLEASE NOTE: You must also use the latest version of the Laerdal Debrief Viewer
SimNewB Advanced Software 2.0.1.77 for SimPad Link Box

316.8 MB - Multilingual
04/04/2013

  • For PC operation with the SimPad Link Box only (This software will not work with VitalSim control unit)
  • SimPad Link Box must be operating SimPad Software version 1.0.7 up to v 1.7.5 NOTE: Do not use SimPad SW 5.0.x or higher as this SW is not suitable for the Legacy Instructor Application. Download the latest software from the software section on the SimPad page.
  • The SimNewB Advanced version software will only work with ELO touchsceen monitors. Not for use with SimPad Portable Patient Monitor or SimPad 17" Patient Monitors.

Datenschutzhinweis. Copyright 2001-2024 Laerdal Medical. Alle Rechte vorbehalten.